Termite inspections: how often, what's checked and what it costs
Most Australian homes should have a termite inspection by a licensed pest controller at least once every 12 months, and more often in high risk areas. A standard inspection usually costs $250 to $500. The inspector checks the inside, roof void, subfloor and garden for live termites, damage and conditions that attract them.
At a glance
| How often | At least every 12 months, more often in high risk areas (QBCC guidance) |
|---|---|
| Typical cost | $250 to $500, or $320 to $520 combined with a general pest treatment |
| Standard | AS 3660.2:2017, termite management in and around existing buildings |
| Who can do it | A licensed pest controller. In Queensland, only a licensed pest controller can complete termite inspections |
| What you get | A written report on termite activity, damage, risk areas and recommendations |
How often should you get a termite inspection?
Get a termite inspection at least once a year. The Queensland Building and Construction Commission (QBCC) tells homeowners to hire a licensed pest controller to inspect and report on the property every year, or more often in high hazard areas.
Your home may also have a durable termite management notice, usually in the electrical meter box. The Building Code of Australia requires it on new homes, and it states the system installed, when it went in and how often the installer recommends inspections. Follow that interval if it is shorter than 12 months.
| Your situation | Inspection interval to ask about |
|---|---|
| Most homes | Every 12 months |
| Older timber homes, homes near bushland or creeks, or a past termite problem | More often than yearly. Ask the inspector what suits the property |
| A termite baiting or monitoring system is installed | The schedule on the termite notice or the installer's contract |
| You've found mud tubes, damaged timber or flying termites | Book now. Don't wait for the next annual check |
What happens during a termite inspection?
The inspector walks the whole property looking for live termites, termite damage and conditions that make an attack more likely. It is a visual inspection, so the report covers only the areas the inspector can reach and see.
- Check the inside of the home: skirting boards, door and window frames, wet areas and any timber that sounds hollow when tapped.
- Enter the roof void and look along the timber frame, especially above wet areas and around the edges.
- Inspect the subfloor, or the slab edge on a slab home, for mud tubes running up from the ground.
- Walk the outside: garden beds against the house, timber fences, sheds, stumps, retaining walls and trees.
- Look for conditions that invite termites, such as leaking pipes, poor drainage, timber touching soil and garden beds covering weep holes or the slab edge.
- Write up a report with what was found, what couldn't be reached and what the inspector recommends.
Many inspectors also use a moisture meter or thermal camera to find hidden activity behind walls. Ask what tools are included before you book, as some businesses charge more for them.
What are the first signs of termites in a house?
The most common early sign is a mud tube: a thin, brown, pencil-width tunnel running up a wall, stump or slab edge. Termites build them to travel from the soil to timber without drying out.
- Hollow or soft timber. Skirting boards or door frames that sound hollow or give when pressed.
- Bubbling paint or wavy plaster. Termites eat timber from the inside and leave the painted surface.
- Swarms of winged termites. Flying termites around lights on warm, humid evenings, or piles of shed wings on sills.
- Doors and windows that start sticking. Damaged frames and moisture from termite activity can warp them.
If you find termites, don't spray them or break open the workings. Disturbed termites often move to another part of the house, which makes treatment harder. Leave them alone and book an inspection.
How do you prepare for a termite inspection?
Clear the way so the inspector can reach every part of the house. Anything they can't get to is listed as inaccessible in the report, which leaves gaps.
- Clear the roof manhole and the space beneath it.
- Open up the subfloor access and move anything stored in front of it.
- Pull boxes and furniture away from walls in the garage and storerooms.
- Make sure the meter box and any termite notice can be reached.
- Secure pets and unlock side gates, sheds and outbuildings.
- Have any earlier termite reports or treatment certificates ready to show the inspector.
Who can do a termite inspection?
Use a licensed pest controller with timber pest work on their licence. The rules differ by state. In Queensland, the QBCC says only a licensed pest controller can complete termite inspections. In New South Wales, the EPA licenses technicians who use pesticides on termites but says a licence isn't needed for inspection only, so ask what training and insurance the inspector has.
Ask for the inspector's licence number before the visit and check it with your state regulator. Our termite treatment guide lists the licence to look for in each state.
How much does a termite inspection cost?
A termite inspection usually costs $250 to $500 for a house, including GST, based on national ranges checked in November 2026. Booking it with a general pest treatment usually brings the combined price to $320 to $520.
Larger homes, two storeys, a tight subfloor or a thermal camera scan push the price up. See our pest control cost guide for prices in each city.
Compare termite inspectors by city
Each city page lists local businesses we've checked, with their Google ratings and licence details where they publish them.
Questions people ask
Is it worth getting a termite inspection?
Yes, for most homes. Termites can damage the timber frame for months without visible signs, and most home insurance policies exclude termite damage. A yearly inspection costing $250 to $500 is small next to the cost of repairing structural timber.
Does home insurance cover termite damage?
Usually not. Most Australian home insurers exclude damage caused by insects, including termites, because it happens gradually. Check your own policy's product disclosure statement, and treat regular inspections as your main protection.
What is the best time of year to get a termite inspection?
Any time of year works for an annual inspection. Termites are most active in the warmer, wetter months, so a spring or early summer inspection can find activity sooner. What matters most is keeping inspections no more than 12 months apart.
Can I do my own termite inspection?
You can check for mud tubes and damaged timber yourself between visits, and the QBCC encourages owners to inspect their termite system regularly. It doesn't replace a professional inspection, which reaches the roof void and subfloor and produces a written report.
How long is a termite inspection report valid for?
A report describes the property on the day of the inspection only. Termites can arrive soon after, which is why the recommended interval is 12 months or less. If you are buying a home, get a new pre-purchase inspection rather than relying on an old report.
Related
Sources
- Queensland Building and Construction Commission: Protect against termites
- QBCC: Buying or selling a property
- Standards Australia: AS 3660.2:2017 Termite management, in and around existing buildings and structures
- NSW EPA: Pest management technicians, fumigators, training and permits
- GIO: Do you cover damage caused by insects, including termites?
- What's The Damage: pest control cost guides (checked November 2026)
General information only. Prices, products and rules change, so confirm details with the business and your state regulator before work starts.